Sunrise E2E is a digital edge-to-edge quilting pattern designed by Karen with Wildflower Quilting and supplied as a download in a ZIP compressed folder. The download includes eleven file formats — .BQM, .DXF, .HQF, .IQP, .PAT, .PLT, .QCC, .QLI, .SSD, .TXT, and .WMF — so confirm your computerized quilting system reads one of those formats before you buy. The listing provides file formats but names no compatible machines or software and specifies no design dimensions, row height, or offset requirement. The guidance below describes general computerized quilting practice, not verified specifications for Sunrise E2E; follow your system’s instructions wherever they differ.
What This Edge-to-Edge Design Is
An edge-to-edge design is stitched in repeated rows across the whole quilt, giving all-over coverage instead of separate quilting for each block or border.
Getting the Download Ready
Save the original ZIP file unchanged as your master copy, then extract its contents into a clearly named folder for the project you are about to stitch. Open the file in the format your system uses and view the complete design on screen, checking that it loads in full before the quilt goes on the frame. Keep a backup copy on separate storage so you can restore the design if your working file is lost or corrupted.
Thread Choice
Build a small test sandwich from scraps that match the fabrics in your quilt top, and stitch the design at the size you plan to use. For a subtler effect, test thread with a similar lightness or darkness to the quilt fabrics; for more visible stitching, test a higher-contrast thread. View that sample in daylight and again under the lighting where the quilt will be used before you choose the thread for the finished quilt.
Sizing the Design
Scale the design proportionally, keeping height and width in the same ratio so its shapes are not stretched or squeezed. Use the test sample to judge the spacing between quilting lines and whether the overall effect is as open or dense as you want. Preview the layout at your proposed scale and row spacing to estimate how many rows will cover the quilt’s length and whether the final row will extend beyond the quilt’s bottom edge.
Placement and Row Alignment
Preview the whole quilt layout in your software and check where repeats meet the quilt’s left and right edges; adjust the horizontal starting position if needed to improve how shapes are cropped at those edges. Check the spacing between rows across the full width, not only at the centre. Record your chosen scale, row spacing, and starting position, and check row alignment using your system’s recommended method each time you advance the quilt on the frame.
Shop the Sunrise E2E at Linda's Electric Quilters.




