Crisp points and smooth curves are what separate homemade-looking projects from professional ones — and the humble point turner is the tool that gets you there. The Clover Point 2 Point Turner packs several tools into one clever stick. Here's how to use it.
What Is a Point Turner?
A point turner is a flat, tapered tool used to push out corners and curves after you've sewn a project right-sides-together and turned it. Think pillow covers, bag linings, collars, and quilted placemats — anywhere you need a sharp corner without poking through the fabric. The Clover 7803 goes further: it combines two turner tips, a hera marker, a finger presser, and curved edges in a single tool.
How to Turn a Perfect Point
- Sew your seam, then trim the seam allowance at the corner to about 1/8 inch and clip across the point. This removes bulk so the corner can turn fully.
- Turn the project right-side out, poking the corner out roughly with your finger first.
- Slide the pointed tip of the turner into the corner and gently push outward — never jab, which can push the tip through the fabric.
- Use the flat side as a finger presser to crease the seam flat from the inside.
The Built-In Extras
- Hera marker: The thin edge works as a hera marker for creasing fold lines on fabric — handy for marking quilting lines or origami-style folds without ink.
- Curved edges: The two curved sides are shaped to push out along curved or long seams, like bag handles or rounded placemat edges.
- Two tips: A fine tip for small, sharp points and a blunter tip for heavier fabrics where you need more pushing power without risk.
Tips for Best Results
- Grade your seams before turning — trim each layer to a slightly different width so the bulk steps down instead of stacking.
- Press after turning. A quick press with steam sets the corner permanently; the finger-presser edge helps you get it flat first.
- Go slow on delicate fabrics. Silk and lightweight cottons puncture easily — use the blunt tip and minimal pressure.
Shop the Clover 7803 Point 2 Point Turner at Linda's Electric Quilters.
