T Rex Digital Cuddle Graphite fabric Shannon Fabrics

What This Fabric Is

The T-Rex Digital Cuddle Graphite Fabric, by Shannon Fabrics, is a Digital Cuddle minky plush: 100% polyester, with a short, smooth 2.5mm pile and a weight of 340 grams per linear yard. The print is pure storybook prehistory — triceratops, stegosaurus, pterodactyls, and T-rex drawn as if in a mix of ink, watercolor, and crayon, on a graphite ground. It is made for the little paleontologist who wants to curl up with a favorite dinosaur book under a quilt that matches the subject.

One honest sizing note before you plan: unlike a 108-inch cotton wideback, or Shannon's 90-inch extra-wide Cuddle solids, this printed minky runs 58/60 inches wide. That makes it a natural single-width backing for baby, crib, and lap quilts — and a pieced backing for anything larger.

How to Choose a Backing: Start With the Size Math

The rule does not change with minky: your backing should measure your quilt top plus 8 inches in both directions — 4 extra inches on every side. That overhang gives a longarm quilter room to load and clamp, and a home quilter room to baste without running short.

Now run that number against this fabric's 58/60-inch width. A 36 by 48 inch crib quilt needs a 44 by 56 inch backing: one width covers it easily, and the 56-inch length is about 1 2/3 yards. A 48 by 60 inch lap quilt needs a 56 by 68 inch backing — the 56-inch side just fits the width, so order about 2 yards for the length. Once the top plus 8 inches passes 60 inches across, plan to piece: seam two lengths side by side along their long edges, press the seam open, and trim the joined panel to size. A pieced minky backing is perfectly normal — just figure the yardage as two full lengths, not one.

Cotton vs. Minky vs. Flannel

A 108-inch cotton wideback is the stable, breathable default: no stretch, a crisp press, and one seamless piece for most tops. Flannel is brushed cotton — warmer and cozier than quilting cotton, but it can shrink more and lint at first. Minky like this Digital Cuddle is the comfort extreme: plush polyester, warm, soft, and drapey, with a printed design a plain backing cannot offer. The trade-offs are its narrower width, a pile that wants gentle handling, and a little stretch to manage while you baste or load. Choose this one when the softness and the dinosaur print are the whole point — for a child's quilt, that is usually exactly right.

Working Tips: Folds, Prewashing, and Longarm Loading

Pressing the fold: Minky arrives folded, but do not attack the crease the way you would cotton. High heat can damage the pile, so smooth the fabric out flat, let the fold relax, and if you must press, press lightly from the wrong side on a low setting, keeping the iron moving.

Prewashing: Polyester minky does not shrink the way cotton does, so many quilters skip prewashing it. What matters is the pairing: if your cotton top is unwashed and likely to shrink, wash the finished quilt gently the first time and expect the top, not the back, to do the moving.

Longarm loading: Load minky with its stretch running side to side, pin evenly, and do not over-tighten — pulled minky relaxes into waves later. Check the print direction before you load: these dinosaurs have a definite upright, and a backing loaded sideways is a mistake you only notice at the end. Keep 4 inches of overhang on every side, as always.

Care

Care for the finished quilt the gentle way: wash cold on a gentle cycle and tumble dry low. Heat is minky's enemy, so skip the hot wash and the high dryer setting that can dull or melt the pile. Treated kindly, that short plush surface stays smooth and soft, and the dinosaurs stay ready for the next expedition — or at least for story time.

Shop the T-Rex Digital Cuddle Graphite Fabric per yard at Linda's Electric Quilters.

Enjoying our quilting guides? Add Linda's as a preferred source on Google to see more of them in your search results: