How much backing do you need for a 60-by-72-inch quilt?
For a 60-by-72-inch quilt top, an example allowance of 4 inches on every side gives a target backing size of 68 by 80 inches. Confirm that allowance with your quilter; it is not a universal rule. A 2.5-yard purchase equals 90 inches of purchased length, which is 10 inches more than the 80-inch target in this example. That 2.5-yard figure is an example purchase for the calculation, not a minimum-yardage recommendation.
This wideback is the Blue Denim Serenity Cotton Wideback Fabric per yard. It is cotton, with a listed width of 108 inches. The maker is P&B Textiles. It is sold by the yard. The listing describes the color as a serene blue denim.
How the backing calculation works
In this example the quilt top is 60 inches wide and 72 inches long, and the example allowance is 4 inches on every side. An allowance on every side adds twice to each overall dimension, because it applies to both ends. Sixty plus 4 plus 4 is 68, and 72 plus 4 plus 4 is 80. The target backing size in this example is therefore 68 by 80 inches.
Yardage converts to inches at 36 inches per yard. Two yards is 72 inches, two and a quarter yards is 81 inches, two and a half yards is 90 inches, and three yards is 108 inches. In this example, a 2.25-yard purchase is 1 inch longer than the target length, and a 2.5-yard purchase is 10 inches longer than the target length.
The width comparison uses the same kind of subtraction. In this example the 68-inch target width is placed against the listed width of 108 inches. One hundred and eight minus 68 is 40. The 80-inch dimension is the one compared with the purchased length in yards in this example.
Two more worked examples
For a 50-by-60-inch quilt top using the same example allowance of 4 inches on every side, the target is 58 by 68 inches: 50 plus 8 is 58, and 60 plus 8 is 68. A 2-yard purchase equals 72 inches of purchased length, which is 4 inches more than the 68-inch target length in this example: 72 minus 68 is 4.
For a 68-by-88-inch quilt top using that same example allowance, the target is 76 by 96 inches: 68 plus 8 is 76, and 88 plus 8 is 96. A 3-yard purchase equals 108 inches of purchased length, which is 12 inches more than the 96-inch target length in this example: 108 minus 96 is 12.
In each example the allowance is the same input, and a different allowance confirmed with your quilter would change every target figure.
About this blue denim cotton wideback
The product listing describes this fabric as a cotton wideback in a serene blue denim color, and describes wideback fabrics as an option for quilt backings, curtains, and duvet covers. A reader who prefers a blue backing may choose this fabric, and a reader who prefers a different color may choose a different fabric — the calculation above is the same either way.
Working with a wide cut
Measure the usable width and length of your own cut before you rely on it, because preparation and squaring can change what you can actually use. Keep the full width supported as you work so the fabric does not pull your measurements off. If you wash the fabric before quilting, measure it again afterwards and compare the new measurements with your target before you load or baste it.
Care
The product listing provides no washing or care instructions. Check any information supplied with your fabric, or ask Linda's Electric Quilters for guidance before washing or pressing.
In short: in the opening example, a 60-by-72-inch top with a quilter-confirmed example allowance of 4 inches on every side gives a 68-by-80-inch target, and a 2.5-yard purchase equals 90 inches of purchased length. Confirm your own allowance with your quilter before using these figures for your quilt.
Shop the Blue Denim Serenity Cotton Wideback Fabric per yard at Linda's Electric Quilters.




