Why metric plans trip up a yardage order
Many patterns from outside the United States give quilt sizes in centimetres, while wideback fabric here is usually ordered by the yard. The conversion itself is simple, but it has to happen in the right order. Convert first, add your backing allowance second, check the width third, and only then turn the cut length into yards. Skipping a step, or rounding too early, is how a backing ends up a few inches short.
The only conversion numbers you need
One inch is exactly 2.54 centimetres, so divide any centimetre measurement by 2.54 to get inches. One yard is 36 inches, which is 91.44 centimetres. Working the other way, one metre is about 39.37 inches, or about 1.09 yards. Keep at least one decimal place while you work. Round only at the very end, when you decide how much to order, and always round that final order up, never down.
Step one: convert the quilt top
Suppose a metric plan finishes at 160 centimetres wide by 210 centimetres long. Divide each number by 2.54. The width is 160 divided by 2.54, which is about 63.0 inches. The length is 210 divided by 2.54, which is about 82.7 inches. Write both numbers down in inches before you do anything else. Every later step, including the conversation with your quilter, now happens in the same units as your fabric order.
Step two: add the allowance your quilter confirms
A backing must be larger than the top, but there is no universal allowance that fits every quilter and every machine. Treat the allowance as an input: ask your quilter how much extra backing they need per side, and use that figure. For this worked example only, suppose your quilter has confirmed 4 inches per side. Add twice that amount to each dimension. The required backing is 63.0 plus 8, which is 71.0 inches, by 82.7 plus 8, which is 90.7 inches. If your quilter gives you a different figure, substitute it here; the method does not change.
Step three: check the width, then convert the length to yards
Before ordering, check that one side of the required backing fits across the usable width of the fabric you plan to use, measured on your own fabric rather than assumed from a product title. Suppose that measured usable width is 106 inches, again as an example input.
Orientation as drawn. Place the 71.0-inch side across the width. It fits inside 106 inches. The cut length is 90.7 inches. Divide by 36 to get about 2.52 yards. If you are ordering in quarter-yard increments, round up to 2.75 yards.
Rotated orientation. Place the 90.7-inch side across the width instead. It also fits inside 106 inches. The cut length is now 71.0 inches. Divide by 36 to get about 1.97 yards, which rounds up to 2.0 yards. Same quilt, same allowance, same backing piece — rotating the layout saves three-quarters of a yard in this example, provided a directional print still runs the way you want it to.
Step four: sanity-check the answer backwards
Convert your order back to centimetres before you buy. Two yards is 72 inches, and 72 times 2.54 is 182.9 centimetres of cut length, which covers the 71.0-inch, or about 180.3-centimetre, side it has to span in the rotated layout. If the backwards check does not cover the required dimension in both units, the forwards math went wrong somewhere. This ten-second check catches most unit slips, because a centimetre-inch mix-up is large enough to show up immediately.
A short worksheet to copy
Top width in centimetres, divided by 2.54, equals top width in inches. Top length in centimetres, divided by 2.54, equals top length in inches. Add twice your quilter-confirmed per-side allowance to each. Check that one required side fits your measured usable width. Divide the other side by 36, round up to the next orderable increment, and convert backwards once to confirm. That sequence turns any metric plan into a yardage order you can place with confidence.



