What a wideback is
A wideback is a quilting fabric woven much wider than standard quilting cotton, so one continuous cut can back a quilt without piecing widths together. Standard quilting fabric needs seams to reach across a large top. A wideback is designed to span that distance in a single piece, which means no backing seam to align, press, or center.
On Linda's catalog, the widebacks in the Studio sample are listed at a nominal width of 108 inches. Nominal means the width named in the product title. It is the starting point for planning, not a guarantee of what you can use edge to edge on your own cut.
Nominal width versus usable width
Every cut has selvages, and the printed or woven area between them is what matters for your quilt. Usable width is the width you can actually rely on after you look at your own piece, trim what needs trimming, and confirm the fabric lies flat and square.
Do not plan from a product-specific usable width quoted by someone else. No verified usable width is recorded for these fabrics, and it can vary by cut. Instead, measure your own piece: lay it out flat, measure across from selvage to selvage, note any area you would exclude, and write down the usable width you measured. That number, not the nominal 108 inches alone, decides whether one cut covers your quilt.
Plan your first seam-free backing
Start with your finished quilt top. Measure its width and length carefully and write both numbers down.
Next, confirm the backing allowance with your quilter. Allowance is the extra backing needed beyond the top on each side for loading and quilting. There is no universal allowance that fits every quilter, frame, and method, so ask the person who will quilt it how much they need per side, and use that figure as your input.
Add the allowance to both dimensions. For example, if your quilter confirms an allowance per side, your required backing width is the top width plus twice that per-side amount, and your required backing length is the top length plus twice that amount. Compare the required width with the usable width you measured. If the required width fits within your usable width, a single seam-free cut can work in that orientation. You can also rotate the plan and compare the other orientation before you buy.
Finally, convert the required length to yardage. Divide the required length in inches by 36 to get yards, then round up to an orderable amount so the cut you receive covers the full required length. Recheck both numbers before ordering.
Choosing fiber and handling your cut
Most widebacks in the sample are cotton, sold per yard, with a few sold as pre-cut packages, so always check the selling unit on the product page before using per-yard math. Cotton widebacks press well and are a familiar choice for a first backing. Whatever fiber you choose, press the fold lines gently, check that the cut is square, and confirm your final measurements once more before quilting.
For more background, see Quilt Backings Explained: How to Choose a Wideback Fabric and How to Choose a Quilt Backing (and Why Grunge Widebacks Work So Well). Use this guide as your starting plan, measure your own fabric, and confirm allowances with your quilter, and your first seam-free backing will start on solid ground.



