Neutral Kona Cotton Bone Wideback Fabric 1 yard pack Robert Kaufman Fabrics

What This Fabric Is

The Neutral Kona Cotton Bone Wideback Fabric, sold by the yard at Linda's Electric Quilters, is a 108-inch cotton wideback made by Robert Kaufman Fabrics. Kona Cotton is the solid quilters reach for when they want a clean, dependable colour with no print to compete with the quilt top, and Bone is one of its most useful neutrals — a warm, soft off-white that sits between stark white and cream.

That in-between tone is why Bone works so often. White can feel cold against warm prints, and cream can look yellow against cool ones. Bone bridges both, supporting scrappy tops, modern solids, and low-volume quilts without stealing attention. At 108 inches wide, it also backs most quilts in one seamless piece: no piecing and no centre seam.

How Much Backing Do You Really Need? Top Plus 8 Inches

Start with the standard rule: your backing should measure your quilt top plus 8 inches in both directions — 4 extra inches on every side. That overhang gives a longarm quilter room to load, clamp, and advance the quilt, and gives a home quilter room to baste securely and quilt right out to the edges as the layers shift slightly during quilting.

Now run the numbers against a 108-inch width. Tops up to 100 inches wide fit across a single width with no piecing. A 60 by 72 inch throw needs a 68 by 80 inch backing: one width covers the 68-inch side, and 80 inches of length is just over 2-1/4 yards. A 72 by 90 inch twin needs an 80 by 98 inch backing — still one width, at just over 2-3/4 yards, so order 3. A 90 by 100 inch queen needs 98 by 108 inches, which fits the width at exactly 3 yards. To order any size, take the longer backing dimension, divide by 36, and round up to a cut you can work with.

Cotton, Minky, or Flannel? Choosing the Right Feel

A 108-inch cotton wideback like this one is the stable, breathable default: it presses crisply, does not stretch, feeds evenly under the needle, and stays seamless for almost any quilt size. Flannel is brushed cotton — warmer and cosier, with a grippier surface and more shrinkage to plan for. Minky is plush polyester — wonderfully soft and drapy, but stretchier to handle, sensitive to high heat, and usually narrower than 108 inches. Choose this Bone cotton when you want a calm, versatile backing that behaves predictably, lets your quilting show, and will not fight with the colours on the front.

Working Tips: Pressing the Fold, Prewashing, and Longarm Loading

Pressing the fold: Wideback yardage arrives folded, and cotton remembers the crease. Unfold it fully and press with a warm iron from the centre outward. For a stubborn centre fold, a light spritz of water or a pass of steam usually settles it — a crease left in place can quilt in permanently.

Prewashing: Cotton can shrink slightly. If you prewash the backing, treat the top fabrics the same way so everything shrinks together. A light neutral like Bone is also worth a quick check before use if your top includes deep reds or indigos that might bleed in a first wash. If you skip prewashing, expect a soft, slightly crinkled texture after the finished quilt's first wash — a look many quilters love.

Longarm loading: Confirm the backing is square before loading, keep the selvages even, and smooth it with even — not tight — tension. With a solid, there is no directional print to centre and no stripe to keep straight, so loading is straightforward. Think about thread colour: matching thread disappears into Bone, while a contrasting thread will make the quilting pattern the star of the back.

Care

For the finished quilt, wash in cool to warm water on a gentle cycle with like colours and tumble dry low or line dry. Cotton softens with washing while keeping its structure, and gentle care helps a soft neutral stay clean and even in tone.

Shop the Neutral Kona Cotton Bone Wideback Fabric per yard at Linda's Electric Quilters.

Enjoying our quilting guides? Add Linda's as a preferred source on Google to see more of them in your search results: