Hey everyone — confident beginners, let's sew a triangular bunting banner in a holiday print and solid: nine double-sided pointed flags, each about 8½ inches wide at the top with about 9⅞ inches showing below the tape, on a 121-inch finished tape for indoor display.
What should you know before you begin?
Skill level: confident beginner. Seam allowance: ¼ inch on the sloping sides. Fabrics: 44/45-inch quilting cotton; measure first.
Why triangles? They give this banner pointed flags, alternating a holiday print with a solid. Indoor decoration, not a toy. Secure with suitable fixings; keep all fabric and tape out of reach of children and pets, away from cots, beds, play areas, heat and flames. Leave no accessible loops or tails. Check tape, seams and fixings before every hanging; remove if loose.
What materials do you need?
| Material | Amount | Required or optional |
|---|---|---|
| Holiday print — Poinsettias In Bloom Crimson Cotton 44"/45" Fabric Per Yard | 1 yard, if prepared piece is 36+ usable inches across × 33+ along; makes 10 of the 18 triangles needed | Required |
| Solid — Oatmeal Bella Solids 44"/45" Fabric Per Yard | 1 yard, same prepared checks; makes 8 of the 18 triangles needed | Required |
| Cotton twill tape, 1 inch wide | 122 inches cut, 121 finished | Required |
| Thread and tools | Thread; sewing machine and needle; rotary cutter, cutting mat and ruler; marking tool; pins or clips; iron and pressing surface; blunt point turner; seam ripper | Required |
| Extras | Tape measure; scissors; pressing cloth if needed | Optional |
| Hanging fixings | Suitable for the mounting surface and banner weight | Required |
What should you cut?
- Rectangles: print: three 11-inch strips, four 9 × 11-inch rectangles per strip at 36+ usable inches — twelve possible, ten needed. Solid: two strips — eight needed; a third, for a spare, takes the total along to 33 inches.
- Triangles: mark the intended top 9-inch edge of each rectangle on the wrong side, keeping directional motifs upright toward it. Mark the centre of the opposite edge, 4½ inches from either corner. Connect that centre to both top corners and cut.
How do you sew the bunting banner?
Cut, pair, sew, turn, then enclose the tops in tape.
- Cut as listed, preserving each marked top.
- Pair two same-fabric triangles, right sides together, edges aligned; clip the sloping sides, leaving the top open for turning. Five print pairs, four solid.
- Mark lines ¼ inch inside and parallel to both sloping edges on one triangle of each pair. Sew from the open top along one line, backstitching at the start; pivot with the needle down where the marked lines intersect, then sew up the other line and backstitch.
- Trim the point allowance close to the stitching, never through it. Turn right side out through the top, push the point out with the blunt turner, press.
- Turn each tape end under ½ inch; fold lengthwise in half and press, enclosing the ends. Mark a 12-inch end zone, nine 9-inch layout slots separated by eight 2-inch gaps, and another 12-inch end zone: 12 + 81 + 16 + 12 = 121.
- Centre each flag in its slot, alternating print and solid, starting and ending with print. Insert each raw top to the tape's centre crease, covering ½ inch; clip. Sewn flags are narrower than their slots, so actual flag-to-flag gaps exceed 2 inches. Visible length is about 9⅞ inches after sewing and insertion.
- Sew close to the tape's open edge, catching both layers and each flag; backstitch both ends and remove pins or clips.
It doesn't have to be perfect, y'all.
How does the 44-inch width work here?
At 36+ usable inches across, each strip yields four rectangles. For narrower fabric, divide usable width by 9 and round down for rectangles per strip; divide each fabric's required rectangle count by that yield and round up for strips needed. Allow 11 prepared inches per strip; the listed yardage may not suffice.
Each triangle's height runs along the yardage (lengthwise grain), its top across the width. Keep the marked top uppermost so motifs run one way.
A fat quarter (about 18 × 22 inches), if usable, cuts four rectangles (two across by two down) — two flags. Pre-washing is optional and can change dimensions and colour behaviour; decide per the fabrics' care information and re-measure.
What can go wrong?
- A blunt point may need fuller turning or less bulky allowance. If taped, release the flag's entire top first. Turn inside out, trim excess allowance without cutting stitches, re-turn, press. If the seam itself is blunt, correct or remake the flag; trimming cannot change its stitched shape.
- An inverted motif needs the flag released: if taped by its point, insert the marked top instead; if a face was cut or paired upside down, remake it.
- Bunching or drift: unpick that section, flatten the tape, restore the slots and centre the flags.
After every repair, seat the raw tops at the centre crease and re-stitch through both tape layers and the flags, securing both ends.
Frequently asked questions
How do I make a shorter or longer banner?
For a positive whole number n of flags, finished tape = n × 9 + (n − 1) × 2 + 24 inches; cut 1 inch longer. Nine inches is each layout slot, not the sewn flag width. Starting with print, print flags = half of n rounded up, solid = half rounded down; each flag needs two rectangles. Per fabric, allow one 11-inch strip (at 36+ usable inches across) per four rectangles, rounding up.
Can I use fat quarters instead of yardage?
Yes, for a short banner: one usable fat quarter makes two.
Can a flag have a print front and a solid back?
Yes: use nine print and nine solid triangles. Cut three 11-inch strips from each fabric; the listed 1 yard each suffices only if each prepared piece retains 36+ usable inches across and 33+ along.
How should you care for the banner?
Dust it; if washing is needed, follow the most restrictive care instructions for the cotton fabric, thread and twill tape — never assume machine washing or tumble drying suits them all.
Adaptations: mix print fronts with solid backs, or use one fabric throughout — eighteen rectangles from five strips (twenty possible at 36+ usable inches), so allow 1¾ yards as a rounded allowance for 55+ prepared inches (55 inches = 1.53 yards).
Next: What Is Oatmeal Bella Solids Fabric? The Warm Neutral for Quilt Backgrounds and Piecing on Fabric Fanatic Tips. Thanks, y'all — see you next time. Bye.
Shop the Poinsettias In Bloom Crimson Cotton 44"/45" Fabric Per Yard at Linda's Electric Quilters.




