A Reversible Duvet Cover in Midnight Cuddle

Hey everyone, this is the 3 Yard 110in Cuddle Cut Midnight, our classic Solid Cuddle 3 minky plush fabric. Today you'll learn to make a reversible duvet cover, finished 68 by 86 inches, Midnight on the front and cotton on the back.

Meet the Fabric First

It comes as a wide back pre-cut, a full 3 yards (108 inches long), at 108 to 110 inches wide. It is 100% polyester.

Midnight is this cut's color name. Its surface is smooth and ultra-soft, beautiful and durable, with a versatile 3mm pile.

Why It Suits a Reversible Duvet Cover

One Midnight panel covers the whole front of this 68 by 86 inch cover in one piece. The cotton back is the second face, so flipping the cover changes the side that shows.

What You Will Need

  • 3 Yard 110in Cuddle Cut Midnight fabric, for one front panel cut 69 by 87 inches
  • Coordinating cotton fabric for the back, in two panels cut 69 by 63 inches and 69 by 32 inches
  • Duvet insert, 68 by 86 inches
  • All-purpose thread
  • Sewing machine with a walking foot
  • Size 90/14 stretch or ballpoint needle
  • Rotary cutter, cutting mat, and a long ruler
  • Long pins or quilting clips
  • Fabric scissors, measuring tape, and fabric marker or chalk
  • Iron and pressing surface, for the cotton hems only
  • Small scraps, about 6 inches square, of your Midnight and your back cotton, for the test seam
  • Seam ripper

Brief Steps to Make It

Step one, lay the Midnight flat. Smooth it by hand.

Step two, mark the front panel at 69 by 87 inches, check square, then cut. The 69 inches fits across the width, and the 87 inches fits along the 108-inch length.

Step three, cut the back cotton into two panels, 69 by 63 inches and 69 by 32 inches.

Step four, hem one 69-inch edge of each back panel. On the 63-inch panel, use its bottom edge. On the 32-inch panel, use its top edge. Fold that edge under 1/2 inch and press it. Fold under another 1/2 inch and press again. Stitch close to the inner fold, and backstitch three stitches at the start and at the end. Each panel is now 1 inch shorter: 69 by 62 inches and 69 by 31 inches.

Step five, test first. Layer the listed scraps, Midnight pile side up, cotton scrap on top. Sew with the walking foot, stitch length 3.0 to 3.5. Backstitch three stitches at the start and at the end. Check both sides: even stitches, flat layers.

Step six, lay the front panel pile side up. Lay the 62-inch back panel on it, right side down, its raw top edge aligned with the front panel's top edge. Its hemmed edge falls 62 inches down from the top.

Step seven, lay the 31-inch back panel on top, right side down, its raw bottom edge aligned with the front panel's bottom edge. Its hemmed edge reaches 31 inches up from the bottom. The two hemmed edges overlap by 6 inches in the middle: 62 plus 31, minus that 6-inch overlap, equals the full 87-inch length. Check that overlap with your measuring tape before you sew. I once pinned the lower panel short of its overlap. I caught it at this measuring step, moved my clips, and only had to sew once.

Step eight, pin or clip around all four sides, through every layer, spacing pins or clips every 4 to 6 inches. Add extra clips across the overlap so both hemmed edges stay flat.

Step nine, sew all four sides with a 1/2-inch seam allowance. Start halfway along one side and backstitch three stitches. At each corner, stop with the needle down 1/2 inch from the next edge, lift the foot, turn the work, lower the foot, and keep sewing. Backstitch three stitches where you meet your starting stitches. Do not sew the two hemmed edges to each other: that unsewn overlap is your opening.

Step ten, turn the cover right side out through the overlap opening. Push each corner out gently with your fingertip, then smooth the cover flat by hand.

Step eleven, slide the 68 by 86 inch duvet insert in through the same opening. Work one insert corner into one cover corner at a time, then smooth it flat. The back panels overlap flat over it, and the cover is finished at 68 by 86 inches. Flip it over whenever you want the cotton side on top.

Practical Tips From My Table

Keep your leftover Midnight for test seams.

Measure the 6-inch overlap twice before you sew.

It does not have to be perfect.

Thanks for sewing along with me. We'll see you next time. Bye.

Shop the 3 Yard 110in Cuddle Cut Midnight at Linda's Electric Quilters.

Enjoying our quilting guides? Add Linda's as a preferred source on Google to see more of them in your search results: