What Is the Sure Guide Needle Threader?
The Sure Guide Needle Threader FAB50036 Sewline #1 is a handheld threading tool designed to take the frustration out of one of sewing's smallest jobs: getting thread through the eye of a needle. This new and improved version will thread very fine needles, in sizes 9 to 12, which are often the hardest to thread by eye alone.
The threader lives inside a case that slides open to reveal its clever mechanism. Inside, a shaped pin does the delicate work for you: you insert the needle, lay the thread in a groove, and press lightly on a lever, and the pin directs the thread through the needle eye. The case will also hold needles, and the top has a magnet so you can easily pick up those small needles.
Why Quilters and Sewists Use It
Fine needles are essential for detailed handwork, but their tiny eyes can slow you down before you even take a stitch. Squinting at a size 9 to 12 needle, especially in low light, wastes time and patience.
Its shaped pin is designed to stop if it hits resistance, preventing it from breaking — a thoughtful safeguard when working with such fine eyes. The built-in magnet makes picking up small needles quick and safe, and because the case holds needles as well, your tool and needles stay together. Whether you are working on intricate embroidery or everyday sewing, it makes threading fast and easy.
How to Use the Sure Guide Needle Threader
- Slide the case open. Open the case to reveal the threading mechanism inside, and take out the needle you want to use.
- Insert the needle. Place the needle into the threader as directed by the mechanism, with the eye positioned where the shaped pin can reach it. The Sure Guide is made for very fine needles in sizes 9 to 12.
- Lay the thread in the groove. Set your thread into the groove so it sits across the needle eye, ready to be pushed through.
- Press lightly on the lever. Press gently — the shaped pin moves into the thread and directs it through the needle eye. Use a light touch: if the pin hits resistance, it will stop, which protects it from breaking. If that happens, reposition the needle and try again rather than forcing it.
- Remove and check the needle. Take the needle out and confirm the thread has passed cleanly through the eye, then pull through enough thread to start stitching.
Practical Tips
Always press the lever lightly. The safety stop only helps if you let it — gentle pressure is all the mechanism needs. If threading fails on the first try, check that the needle is seated correctly and that the thread is sitting fully in the groove before pressing again.
Use the magnet every time you set a needle down. Fine needles are easy to lose, and sweeping the magnet over your work area gathers them up safely. Keep a few spare size 9 to 12 needles stored inside the case so they are ready when one bends or dulls.
Care and Storage
Close the case when you are finished so the mechanism stays protected and your stored needles stay contained. Keep it in your hand-sewing kit where it will not be crushed under heavier tools. Avoid forcing the lever if you feel resistance, and keep the case dry and free of lint — a quick brush-out keeps the groove clear.
Project Ideas
Keep it beside you for intricate embroidery, where fine needles and frequent thread changes make fast threading especially welcome. It is equally handy for everyday hand sewing — mending, hemming, and tacking — and for hand quilting and appliqué where you rethread often.
Shop the Sure Guide Needle Threader FAB50036 Sewline #1 at Linda's Electric Quilters.
