Tranquil Patina Layer Cake

Hey everyone. Today we're sewing an envelope-back pillow cover from layer cake squares, and you'll learn how four big squares become an 18-inch cover with no zipper.

The short version: sew four 10-inch squares into a two-by-two front, trim it to 18½ inches square, add two overlapping back panels, and the cover finishes at 18 by 18 inches for an 18-inch form. It suits a confident beginner.

What is the finished size, and what are the key numbers?

Finished size: 18 by 18 inches. Seam allowances are ¼ inch throughout, except the hems below. The joined front measures 19½ inches square before trimming. You use 4 of 42 squares in one pack. Skill level: confident beginner.

Why make this version with layer cake squares?

The charm-pack version uses sixteen squares. This one uses four big squares, so the front has fewer seams than the sixteen-square version. The envelope back needs no zipper: two hemmed panels overlap, hold the form, and slip off for washing. Put darks on the diagonal and the squares balance. Calmer or bolder? Completely up to you.

What do you need?

Material or tool What you need Required or optional
One layer cake (42 squares, 10 in.) 4 squares for the front; 38 left over Required
Backing fabric ½ yd quilting cotton; two panels below Required
Pillow form 18 × 18 in. form Required
Thread 50-weight cotton piecing thread Required
Quarter-inch foot, pins, marking pencil, seam ripper True seams, crossings, marks, fixes Required
Rotary cutter, mat, ruler, iron Trimming, cutting yardage, pressing Required
Batting and backing, about 20 × 20 in. For a quilted front Optional

My pack pick is the Tranquil Patina Layer Cake — 42 cotton squares, 10 inches, by Debbie Maddy for Moda. A quiet solid suits the back — see our read on Natural Bella Solids.

What gets cut, and from where?

From the pack: choose 4 squares; set 38 aside. From backing: cut two rectangles, 18½ inches wide by 13 inches tall, side by side across the width — that needs at least 37 usable inches across, so check width first and buy more if yours falls short. Hemmed, each measures 18½ by 12½ inches. Optional quilted front: batting and backing about 20 by 20 inches. Cut biggest first.

How do you sew the pillow cover?

  1. Sort squares by value. Choose four; lay them two by two, darkest on one diagonal.
  2. Step back or snap a photo. Move clashing squares.
  3. Sew the top pair, ¼-inch seam. Check now: 19½ by 10 inches. If not, adjust your guide and rip that one seam, not four later.
  4. Sew the bottom pair. Press its seam left, the top pair's right, so allowances oppose.
  5. Pin pairs right sides together, matching center seams, and sew. Warning: if seams do not nest, stop and re-press — forcing them shifts the crossing.
  6. For a quilted front, layer on batting and backing, baste, and quilt simply: stitch in the ditch, or straight lines at 8 to 10 stitches per inch. Skip for softer.
  7. Mark the center seams. Trim to 18½ inches square, measuring 9¼ inches out from the center crossing each way. Warning: trimming one side only moves the crossing off center.
  8. Hem each back panel: fold one long edge ¼ inch to the wrong side twice, press, stitch. Each now measures 18½ by 12½.
  9. Lay the front right side up. Place panels right side down, one at top, one at bottom, hemmed edges overlapping. Warning: overlap should be about 6½ inches — if panels only just meet, the form will peek out.
  10. Pin all four sides; sew a ¼-inch seam, backstitching at both ends. Go slowly where panels cross; it is thicker there.
  11. Clip corners close to, not through, stitching. Turn right side out, poke corners gently, press. Slip in the form.

How does the precut math work?

Two 10-inch squares sewn together measure 19½ inches: 10 plus 10, minus ½ inch for the two allowances in that join. Two rows joined give a 19½-inch square. Trimming 1 inch total per direction leaves 18½, and the perimeter seam finishes it at 18 inches.

Yield: one pack holds 42 squares; this cover takes 4 — ten fronts' worth, with 2 spare. Back math: two panels at 12½ inches total 25, minus 18½, leaves 6½ inches of overlap. If an edge is pinked, leave it as it comes; pick one consistent measuring reference and use it for every square. Sort first, chain piece pairs second, press opposing third.

What can go wrong, and how do you fix it?

Symptom Likely cause Fix
First pair is not 19½ in. wide Seam wider or narrower than ¼ in. Adjust the guide; re-sew that pair before joining rows
Crossing off center after trimming Trim taken from one side only Measure 9¼ in. from the center crossing each side
Form peeks out the back Panels do not overlap enough Re-pin for about 6½ in. of overlap
Center seams will not nest Both pairs pressed the same way Re-press one pair's seam the other way

What do people ask before making this cover?

Do I need a whole layer cake for one cover?

No. One cover uses 4 of 42 squares.

Can I skip trimming the joined front?

Yes, but the cover then finishes at 19 inches, fits loosely, and the back panels must be recut to the wider front with the overlap re-run. Trim for the fit planned here, or re-run all the panel math first.

Can I size this up for a 20-inch form?

Not from this layout alone: the joined front is 19½ inches, short of the 20½ inches a 20-inch cover needs. Add a border, then re-run the panel math.

Must the squares be trimmed first?

No. Sew them as they come, whatever the edge finish, and check the first pair first.

Can I use a print for the back panels?

Yes. Keep panel sizes and overlap the same.

How do you care for it, and change it up?

Care follows the components: check the labels from the fabric, batting, and form makers, and follow those instructions for each part. Remove the form before washing the cover. Change the mood, not the method: four lights read calm; two darks diagonal read bold. Or make a second cover from leftovers. Hear me: it doesn't have to be perfect. You're your own worst critic. Take your time — it's not a race. Take it one seam at a time.

Shop the Tranquil Patina Layer Cake at Linda's Electric Quilters.

Thanks for sewing along. We'll see you next time. Bye.

Enjoying our quilting guides? Add Linda's as a preferred source on Google to see more of them in your search results: