A No-Seam Tablecloth in Brown Latte Etchings Wideback

Hey everyone. Today you will learn how to make a simple tablecloth with no center seam.

Here we go.

Meet the Fabric First

This is the Brown Latte Etchings Cotton Wideback Fabric Per Yard from Oasis Fabrics.

It is cotton. That matters at the table.

Cotton presses crisp. It drapes nice. It washes up for real life.

And this one is wide. Really wide.

The width of fabric is 118 inches. That is the number to remember.

Most quilting cottons are around 44 inches wide. You would have to piece those together.

With 118 inches, you do not. One width can cover your table.

The color is brown latte. Warm. Soft. Light brown and easy to live with.

It has that Etchings swirl all through it. Think gentle curls instead of a flat solid.

That swirl is your friend. It adds interest up close. It also hides a little wrinkle or crumb.

I love a wideback for this. Fewer seams. Less fuss. More time sewing.

We're not reinventing the wheel here. We're just using the width we already have.

A tablecloth is just a big, hemmed rectangle. That is the beauty of it.

It dresses up the table fast. It also protects the wood underneath.

For a table that seats six, I like a finished cloth about 70 inches wide by 90 inches long. That gives you a nice drop on every side.

Measure your own table first. Add twice the drop you want.

Want a 10-inch drop? Add 20 inches to the width. Add 20 inches to the length too.

Why does this fabric suit it so well? Three reasons.

First, the 118-inch width spans the table in one piece. No seam down the middle.

Second, the brown latte color goes with everyday dishes. It also looks right for company.

Third, the swirl pattern feels finished all by itself. No piecing needed. Completely up to you if you stop there.

Two yards gives you a piece 72 inches by 118 inches. We will trim the long side down for our cloth.

That leftover strip is a bonus. Save it for napkins or placemats.

Step 1: Square it up. Lay the fabric flat and smooth it out. Trim one edge straight, then measure from there.

Step 2: Cut your rectangle. Cut a piece 72 inches wide by 92 inches long. That includes your hem allowance.

Step 3: Press the hems. Fold each edge in 1/2 inch and press. Fold in another 1/2 inch and press again.

Step 4: Mind the corners. Slow down here, folks. Open each corner, trim a tiny bit of bulk, and refold for a neat point.

Step 5: Stitch it down. Sew close to the inner fold all the way around. Pivot at each corner with the needle down.

Step 6: Press and place. Give it one last press. Lay it on the table and smooth the drop even.

Just like that. You have a tablecloth.

Prewash if you like a softer drape. Or skip it for a crisper finish. My preference: press well and sew a test hem on a scrap first.

Check that scrap with your real thread. If the stitches pucker, adjust a little at a time.

Use a long ruler for those long cuts. Mark the full line before you cut. A rushed cut is where wobbles start.

And here is your permission beat, folks. It does not have to be perfect.

You are your own worst critic. Your family will see a warm table, not that one soft corner.

Take your time. It's not a race. If I can do this, y'all can do it.

Make one for your kitchen. Make one as a gift. Super duper easy once you use that wide width.

Thanks so much for sewing along with me today. We'll see you next time. Bye.