A stuffed fabric snowman keeps its winter cheer all season: a white silhouette, stuffed firmly, with an embroidered face, a felt nose, and a fabric scarf. It is decoration, not a toy.
What You'll Make
One stuffed snowman from two matching freehand silhouette pieces. The seam-line outline is about 9 inches tall and 5 inches across at its widest point; finished dimensions vary with shape and stuffing. No printable template is included.
Materials
Eight of the nine entries below link to Linda's product pages — about 89% by entry count, excluding the additional tools listed separately.
- White Grunge Basics - White Paper - 44/45" Per Yard — two silhouette pieces
- Red Grunge Basics Burgundy 44"/45" Per Yard — one narrow strip for the scarf
- Embroidery Felt Pack Christmas — Gingerbread felt for a warm brown nose; this pack does not list orange
- FiberLoft Fiberfill 16oz Bag — for the head and body
- 2024 White Aurifil Cotton 50wt Large Spool — seams and closing
- Universal Needles Assorted - 10 count by Organ Needles
- Quilters Select 45mm Deluxe Rotary Cutter — for the straight scarf strip
- Stuffing Tool — for pushing fiberfill into curves
- Black embroidery floss and a hand-sewing needle — check your supplies first, or ask a craft store or your local quilt shop.
Buying note: allow two white rectangles at least 10 by 6 inches each (layout space, not finished dimensions), plus a scarf strip 1.5 by 14 inches. Check template and scarf fit before cutting. Press the cottons flat first, following care instructions; if you plan to wash the finished piece, prewash and dry them first — pressing alone does not preshrink fabric.
Tools also needed: sewing machine, paper and pencil, removable fabric marker, fabric scissors, cutting mat and ruler, pins, an iron on a heat-safe surface, and stitch-test scraps.
Steps
- Draw the template and test. On paper, draw the seam-line silhouette above: a round head on a rounded body, with a fairly flat bottom. With the machine off, fit a needle compatible with your machine, fabric, and thread, following the manual. Test the seam on two fabric layers; check for skipped stitches, puckering, or damage.
- Cut two matching pieces. Pin the template to the white fabric and cut around it with fabric scissors, adding 1/4 inch all around. Repeat for a matching piece. Cut the scarf strip with the rotary cutter: free hand behind the ruler's edge, fingers clear of the blade, cut away from your body, and close the blade when set down.
- Make the face first. On the front piece only, mark the face with the removable marker, tested on a scrap. Stitch a small Gingerbread felt triangle, about 1 inch long, at the nose center. Embroider eyes and a mouth in black floss; secure thread ends on the wrong side.
- Sew the silhouette. Place the pieces right sides together and pin, marking a 2-inch unstitched gap along the flat bottom. Stitch around with a 1/4-inch seam, pivoting at curves with the needle down. Backstitch at both gap ends; remove each pin before it reaches the needle — never sew over pins.
- Clip and turn. Make small straight clips into the allowance at inward curves and V-notches at outward curves, keeping cuts short of the stitching. Turn right side out through the gap and ease curves out gently; do not force the stuffing tool against the fabric. Press lightly, fingers clear of the soleplate and steam, away from the opening.
- Stuff evenly. Add fiberfill in small amounts to the head, body, and base until evenly filled and the seams stay smooth, without stretching or gaping.
- Close the gap. Fold the gap edges in 1/4 inch and pin. Slip-stitch the opening closed with the hand needle and white thread, knot, and bury the end. Remove every pin and account for the hand needle.
- Add the scarf. Tie the red strip around the neck, check its fit, then trim the ends at an angle. Tack it in place so it cannot slip off, and account for the hand needle again.
- Check before display. Inspect every seam, account for all pins and needles, trim loose threads, and check the nose, face, and scarf hold. Lift it by the body, not the scarf or nose.
Tips
Display it supported against a stable backdrop, away from shelf edges — do not rely on it standing unsupported. If the pieces do not match, trim the larger to the smaller before Step 4. Keep it away from candles and heaters, and out of reach of small children and pets.
Where to Get Everything
Find the linked supplies on Linda's Electric Quilters website. For the floss, hand needle, or a missing tool such as a fabric marker, check your supplies first, or ask a craft store or your local quilt shop.




